Corvette C7 Engine Part Two
2014 Chevrolet Corvette C7 LT1 Engine
Close2014 Corvette C7 engine. Photos are of the LT1 engine without the Z52 dry sump oil system as evidenced by the oil filler cap and dipstick.
2014 Chevrolet Corvette C7 LT1 Engine
Close2014 Corvette C7 engine, installed and including the Z52 option (below); notice the lack of an oil filler cap and dipstick. Both items are part of the 11.5 quart dry sump tank which is separate from the engine but mounted in the engine compartment.
2014 Chevrolet Corvette C7 LT1 Engine Z52 Dry Sump Oil System
Close2014 Chevrolet Corvette C7 LT1 Engine Direct Injection Fuel Rails
CloseDirect injection fuel system rails.
2014 Chevrolet Corvette C7 LT1 Engine Direct Injection
Close2014 Chevrolet Corvette C7 LT1 Engine Direct Injection
CloseDirect injection as installed in the block valley; rear view of LT1 engine. Note the fuel pump in the foreground. The fuel pressure it is responsible for is considerable; 2,175 psi as compared to less than 100 psi for standard fuel injection systems. The fuel pump is located in the block valley to keep the noise it produces under control - "Acoustic Encapsulation" is the technical term. The direct injectors flow 22.0 cc/s @ 10 MPa.
2013 Chevrolet Corvette LS3 Engine Cylinder Head
CloseAbove: 2013 LS3 cylinder head, valve view; Below: 2014 LT1 cylinder head, valve view.
2014 Chevrolet Corvette C7 LT1 Engine Cylinder Head
Close2014 Chevrolet Corvette C7 LT1 Engine Combustion Chamber
CloseAbove: 2014 Corvette combustion chamber. Note the direct injection injector opposite the spark plug.
2014 Chevrolet Corvette C7 LT1 Engine Cylinder Head
CloseAbove: 2014 Corvette LT1 cylinder head; Below: 2013 Corvette LS3 Cylinder Head.
2013 Chevrolet Corvette LS3 Engine Cylinder Head
Close2014 Corvette LT1 (left) and 2013 Corvette LS3 Cylinder Heads Compared
Close2014 Chevrolet Corvette LT1 cylinder heads (left) and 2013 Chevrolet Corvette LS3 cylinder heads (right) compared. As with the original 1955 265 cubic inch engine, the right and left cylinder heads are interchangeable.
2014 Chevrolet Corvette C7 LT1 Engine Block
CloseEngine block, bottom views, crankshaft removed. Below: Oil Jets View.
2014 Chevrolet Corvette C7 LT1 Engine Oil Jets View
Close2014 Chevrolet Corvette C7 LT1 Engine Oil Jets View
CloseAbove: Crankshaft view with piston cooling oil jets which are standard on all C6 and C7 Corvette engines. The oil spray reduces piston temperature, increasing output and long term durability. The extra layer of oil on the cylinder walls and wrist pins also dampens noise. For optimal efficiency, the oil jets are used only when they’re needed the most: at start-up, giving the cylinders extra lubrication enhancing the engine’s durability and at higher engine speeds when the engine load demands it.
2014 Chevrolet Corvette C7 LT1 Engine Connecting Rod Bearings
Close2014 Chevrolet Corvette C7 LT1 Engine Main Bearings
Close2014 Corvette Engine Part Three
More on the 2014 Corvette: |
||
Styling | Interior | Engine |
Chassis | Performance | Technology |
Convertible | Instruments | Z51 |
Evolution | Photographs | Specifications |
2014 Corvette Options