About The Corvette

    

Corvette Specs

    

Corvette: Year By Year

    
  

2024 Specs

2024 Chevrolet Corvette C8 E-Ray 3LZ on display at the Petersen Museum, Los Angeles CA

2024 Chevrolet Corvette C8 E-Ray 3LZ on display at the Petersen Museum, Los Angeles CA

Close2024 Chevrolet Corvette C8 E-Ray 3LZ on display at the Petersen Museum, Los Angeles CA
To learn more about the 2024 Corvette, click here.

Body Specs

Model Chevrolet Corvette Stingray
Body styles / driveline: Two Door Coupe, Hardtop Convertible / Mid Engine
Manufacturing Plant: Bowling Green, KY
Wheelbase: 107.2 inches (2,722 mm)
Length: 182.3 inches (4,630 mm)
Width: 76.1 inches (1,934 mm)
Height: 48.6 inches (1,234 mm)
Track: Front: 64.9 inches (1,648 mm)
Rear: 62.4 inches (1,586 mm)
Dry Weight: 3,366 lbs (1,530 kg) - Coupe
Weight Distribution: Front: 39.4%
Rear: 60.6%
Seating Capacity: Two
Headroom: 37.9 inches (962 mm)
Leg Room: 42.8 inches (1,086 mm)
Shoulder Room: 54.4 inches (1,381 mm)
Hip Room: 52.0 inches (1,321 mm)
Cargo Volume: 12.6 cu. ft. (356.8 cu. L)
Fuel Capacity: 18.5 gal (70 L)
Transmission: M1L 8-speed dual clutch (DCT) 1st Gear 2.91:1
2nd Gear 1.76:1
3rd Gear 1.22:1
4th Gear 0.88:1
5th Gear 0.65:1
6th Gear 0.51:1
7th Gear 0.40:1
8th Gear 0.33:1
Reverse Gear 2.63:1
Ring and Pinion Ratio 3.55:1 (mLSD, eLSD)
Standard Fuel Tank Capacity: 18.5 gal (70 L)
Wheels: Front: 19-inch x 8.5-inch (w/5 x 120mm bolt pattern)
Rear: 20-inch x 11-inch (w/5 x 120mm bolt pattern)
Tires: Michelin Pilot Sport ALS
with Z51: Michelin Pilot Sport 4S

Front: 245/35ZR19
Rear: 305/30ZR20
EPA Fuel Economy: 15 MPG (City) / 27 MPG (Highway) / 19 MPG (Combined)

Engine Specs

Stingray Designation: LT2
Type: 90° V8, Pushrod, OHV (overhead Valve)
Displacement: 374.92 cu. in. (6.2 L)
Bore / Stroke - Coupe, Convertible: 4.06 inches x 3.62 inches 103.25 mm x 92 mm)
Induction System: Normally Aspirated
Horsepower: 495 hp @ 6,450 RPM
Torque: 470 lbs. - ft. @ 5,150 RPM (SAE-certified, with performance exhaust)
Fuel Delivery: Direct injection with Active Fuel Management: Max pressure: 2,175 psi (15 Mpa / 150 bar)
Throttle Body: 87mm single bore (electronic)
Redline: 6,500 RPM
Compression Ratio: 11.5:1
ECU: GM E99 (32-bit processing)
Block Material: 319-T7 cast aluminum
Oiling System: Dry sump-type; includes oil-spray piston cooling
Combustion Chamber Voliume: 59 cc
Engine Oil Capacity: 7.5 Quarts, with filter
Oil Type: Dexos 2 0W40 synthetic

Performance

0 - 60 MPH: 3.0 seconds (GM) 2.9 seconds with Z51 (GM)
1/4 mile: 11.2 seconds @ 123 MPH (GM)
11.2 seconds @ 121 MPH with Z51 (GM)

0 - 60 MPH: 2.8 seconds with Z51 (Car and Driver)
1/4 mile: 11.2 seconds @ 122 MPH with Z51 (Car and Driver)


Chassis Specs

Suspension - Front: Short/long arm (SLA) double wishbone, forged aluminum upper and cast aluminum L-shape lower control arms; monotube shock absorbers (46mm /); Magnetic Selective Ride Control 4.0 available on Z51. Adjustable front lift with memory is available
Suspension - Rear: Short/long arm (SLA) double wishbone, forged aluminum upper and cast aluminum L-shape lower control arms; direct-acting stabilizer bar; monotube shock absorbers (46mm); Magnetic Selective Ride Control 4.0 available with Z51
Steering: Bosch/ZF variable-ratio rack-and-pinion with electric power assist; includes Active Steer Stops with available Magnetic Ride Control 4.0
Steering Ratio: 15.7:1
Turning Circle: 38 ft. (11.6 m)
36.4 ft. (11.1 m) - with FE4 Magnetic Ride Control

Brake Specs

Type: Front and rear E-boost-assisted discs with Brembo four-piston/two-piece front calipers and four-piston/monobloc rear calipers
With Z51 – Front and rear E-boost-assisted discs with Brembo four-piston monobloc caliper at front and rear
Rotor Diameter: Front: 12.6 inches (321 mm)
13.3 inches (345 mm) - with Z51
Rear: 13.6 inches (339 mm)
13.8 inches (360 mm) - Z51
Rotor Thickness: Front: 1.18 inches (30 mm)
1.18 inches (30 mm) - Z51
Rear: 1.02 inches (26 mm)
1.06 inches (27 mm) - Z51

2024 Corvette Z06 Specs

Body Specs

Model Chevrolet Corvette Z06
Body styles / driveline: Two Door Coupe, Hardtop Convertible / Mid Engine
Manufacturing Plant: Bowling Green, KY
Wheelbase: 107.2 inches (2,722 mm)
Length: 184.6 inches (4,688 mm)
185.9 inches (4,722 mm) with carbon fiber ground effects
Width: 79.7 inches (2,025 mm)
Height: 48.6 inches (1,235 mm)
Track: Front: 66.3 inches (1,685 mm)
Rear: 66.1 inches (1,678 mm)
Dry Weight: 3,434 lbs (1,561 kg) - Coupe - Z07 equipped with carbon fiber wheels
Weight Distribution: Front: N/A
Rear: N/A
Seating Capacity: Two
Headroom: 37.9 inches (962 mm)
Leg Room: 42.8 inches (1,087 mm)
Shoulder Room: 54.4 inches (1,382 mm)
Hip Room: 52.0 inches (1,321 mm)
Cargo Volume: 12.6 cu. ft. (357 cu. L)
Fuel Capacity: 18.5 gal (70 L)
Transmission: M1L 8-speed dual clutch (DCT) 1st Gear 2.91:1
2nd Gear 1.76:1
3rd Gear 1.22:1
4th Gear 0.88:1
5th Gear 0.65:1
6th Gear 0.51:1
7th Gear 0.40:1
8th Gear 0.33:1
Reverse Gear 2.63:1
Ring and Pinion Ratio 5.56:1
Standard Fuel Tank Capacity: 18.5 gal (70 L)
Wheels: Front: 20 inch x 10-inch (w/5 x 120mm bolt pattern)
Rear: 21-inch x 13-inch (w/5 x 120mm bolt pattern)
Tires: Michelin Sport Cup 2 R ZP (with Z07 option)
Front: 275/30ZR20
Rear: 345/25ZR21
EPA Fuel Economy: N/A


Engine Specs

Z06 Designation: LT6
Type: 90° V8, DOHC
Displacement: 374.92 cu. in. (6.2 L)
Bore / Stroke: 4.104 inches x 3.150 inches (104.25 mm x 80 mm)
Induction System: Normally Aspirated
Horsepower: 670 hp @ 8,600 RPM - Tested per SAE J1349
Torque: 460 lbs. - ft. @ 6,300 RPM - Tested per SAE J1349
Fuel Delivery: Exhaust side direct injection. Max pressure: 5,076 psi
Throttle Body: Twin 87mm single bore (electronic)
Redline: 8,600 RPM
Compression Ratio: 12.5:1
ECU: GM E68 (32-bit processing)
Block Material: A319-T7 sand-cast aluminum with pressed-in iron cylinder liners and four-bolt main bearing caps
Cylinder Head Material: A356 T6 cast aluminum
Oiling System: Six stage dry sump (8-qt. capacity); includes oil-spray piston cooling
Combustion Chamber Voliume: 58.8 cc
Engine Oil Capacity: 8.0 Quarts
Oil Type: DexosR synthetic 5W50
Valvetrain: Dual overhead camshafts with mechanical finger follower valvetrain and dual-coil valve springs
Valve Size 1.654 inch / 42 mm. titanium (intake) & 1.378 inch / 35 mm. sodium filled (exhaust)
Firing Order 1-4-3-8-7-6-5-2


Performance

0 - 60 MPH: 2.6 seconds (GM, preliminary)
1/4 mile: 10.6 seconds (GM, preliminary)


Chassis Specs

Suspension - Front: Short/long arm (SLA) double wishbone, forged aluminum upper and cast aluminum L-shape lower control arms; monotube shock absorbers (46mm); Magnetic Selective Ride Control 4.0 available. Specific calibration with available Z07 package. Front lift with memory is available.
Suspension - Rear: Short/long arm (SLA) double wishbone, forged aluminum upper and cast aluminum L-shape lower control arms; direct-acting stabilizer bar; monotube shock absorbers (46mm); Magnetic Selective Ride Control 4.0. Specific calibration with available Z07 package
Steering: Variable-ratio rack-and-pinion with electric power assist; includes Active Steer Stops with available Magnetic Ride Control 4.0
Steering Ratio: 15.7:1
Turning Circle: N/A


Brake Specs

Type: Front and rear eBoost-assisted discs with Brembo six-piston/two-piece front calipers and four-piston/monobloc rear calipers.
Rotor Diameter: Front: 14.6 inches (321 mm) x 1.3 inches (34 mm.)
Front: 15.7 inches (398 mm) x 1.5 inches (38 mm.) - With available carbon ceramic
Rear: 15.0 inches (339 mm) x 1.3 inches (38 mm.)
Rear: 15.4 inches (390 mm) x 1.3 inches (34 mm.) - With available carbon ceramic


Corvette E-Ray Specs
Engine

Type LT2 6.2L V-8 VVT with direct injection and Active Fuel Management (cylinder deactivation) and Stop/Start
Bore & stroke (in. / mm): 4.06 x 3.62 / 103.25 x 92
Block Material: A319-T7 cast aluminum with cast-in iron cylinder liners and nodular main bearing caps
Oiling System: Dry sump-type (7.5-qt. capacity); includes oil-spray piston cooling
Oil Type: Dexos 2 0W40 synthetic
Cylinder Head Material: 319-T7 cast aluminum
Combustion Chamber Volume: 59cc
Compression Ratio: 11.5:1
Valvetrain: Overhead valve, two valves per cylinder; dual-equal variable valve timing
Valve Size (in. / mm): 2.13 / 54 hollow (intake) & 1.59 / 40.4 sodium filled (exhaust)
Fuel Delivery: Direct injection with Active Fuel Management: Max pressure: 2,900 psi (20 Mpa / 200 bar)
Firing Order: 1-8-7-2-6-5-4-3 (all cylinders); 1-7-6-4 (with deactivation)
Throttle Body: 87mm single bore (electronic)
ECU: GM E99 (32-bit processing)
Horsepower (hp / kW): 495 / 369 @ 6450 rpm
Torque (lb.-ft. / Nm): 470 / 637 @ 5150 rpm


Transmission and Axle

Type: MLH 8-speed dual clutch (DCT)


Electrification System

Type: Single motor and gearset
Motor: Permanent magnetic drive motor
Power: 160 hp / 120 kW
Torque (lb.-ft. / Nm): 125 / 165 @ motor
Battery Type: Lithium-ion
Energy: 1.9 kWh
Combined Power (with engine): 655 hp / 481 kW


Chassis and Suspension

Front Suspension: FE5 Short/long arm (SLA) double wishbone, forged aluminum upper and cast aluminum L-shape lower control arms; monotube shock absorbers; Magnetic Selective Ride Control 4.0. Adjustable front lift with memory is available
Rear Suspension: FE5 Short/long arm (SLA) double wishbone, forged aluminum upper and cast aluminum L-shape lower control arms; direct- acting stabilizer bar; monotube shock absorbers; Magnetic Selective Ride Control 4.0
Steering Type: Variable-ratio rack-and-pinion with electric power assist; includes Active Steer Stops with Magnetic Ride Control 4.0
Steering ratio: 15.7:1
Turning Circle (ft. / m): 36.4 / 11.1
Brake Type: Front and rear eBoost-assisted carbon ceramic discs with Brembo six-piston/monobloc front calipers and four-piston/monobloc rear calipers
Brake Rotor Size (in. / mm): Front: 15.7 x 1.5 / 398 x 38
Rear: 15.4 x 1.3 / 391 x 34
Wheel Size: Front: 20-inch x 10-inch (w/5 x 120mm bolt pattern)
Rear: 21-inch x 13-inch (w/5 x 120mm bolt pattern)
Wheel Size: Front: 275/30ZR20
Rear: 345/25ZR21


Exterior Dimensions

Wheelbase (in. / mm): 107.2 / 2722
Overall Length (in. / mm): 184.6 / 4699
Overall Width (in. / mm): 79.7 / 2025
Overall Height (in. / mm): 48.6 / 1235
Track (in. / mm): Front: 66.3 / 1685
Rear: 66.1 / 1678


Interior Dimensions

Headroom (in. / mm): 37.9 / 962
Legroom (in. / mm): 42.8 / 1087
Shoulder Room (in. / mm): 54.4 / 1382
Hip Room (in. / mm): 52 / 1321


Weights and Capacities

Dry Weight (lb. / kg): 3774 / 1712 (coupe)
3856 / 1749 (convertible)
Cargo Volume (cu. ft. / L)*: 12.5 / 355
Cargo and load capacity limited by weight and distribution.
Fuel Tank Capacity: 18.5 gal. / 70 liters

2024 Corvette