Corvette: Year By Year

    

About The Corvette

    

Corvette Specs

    

Corvette C8 Mid Engine Specs

2020 Chevrolet Corvette C8 overhead view

2020 Chevrolet Corvette C8 overhead view

Close2020 Chevrolet Corvette C8 overhead view

2020 CHEVROLET CORVETTE STINGRAY PRELIMINARY SPECIFICATIONS

ENGINE
Type: LT2 6.2L V8 VVT with direct injection and Active Fuel Management (cylinder deactivation)
Bore & stroke (in / mm): 4.06 x 3.62 / 103.25 x 92
Block Material: A319-T7 cast aluminum with cast-in iron cylinder liners and nodular main bearing caps
Oiling System: Dry sump-type (7.5-qt. capacity); includes oil-spray piston cooling
Oil Type: Dexos 2 0W40 synthetic
Cylinder Head Material: 319-T7 cast aluminum
Combustion Chamber volume: 59cc
Compression Ratio: 11.5:1
Valvetrain: Overhead valve, two valves per cylinder; dual-equal variable valve timing.
Valve Size (in / mm): 2.13 / 54 hollow (intake) & 1.59 / 40.4 sodium filled (exhaust)
Fuel Delivery: Direct injection with Active Fuel Management: Max pressure: 2,175 psi (15 Mpa / 150 bar)
Firing Order: 1-8-7-2-6-5-4-3 (all cylinders); 1-7-6-4 (with deactivation)
Throttle body: 87mm single bore (electronic)
ECU: GM E99 (32-bit processing)
Horsepower
(hp / kW @ rpm): SAE-certified to 495 / 369 @ 6450 rpm (with performance exhaust)
Torque
(lb.-ft./ Nm @ rpm): SAE-certified to 470 / 637 @ 5150 rpm (with performance exhaust)
TRANSMISSION & AXLE
Type: M1L 8-speed dual clutch (DCT)
CHASSIS & SUSPENSION
Front Suspension: Short/long arm (SLA) double wishbone, forged aluminum upper and cast aluminum L-shape lower control arms; monotube shock absorbers (46mm /); Magnetic Selective Ride Control 4.0 available on Z51. Adjustable front lift with memory is available
Rear Suspension: Short/long arm (SLA) double wishbone, forged aluminum upper and cast aluminum L-shape lower control arms; direct-acting stabilizer bar; monotube shock absorbers (46mm); Magnetic Selective Ride Control 4.0 available with Z51
Steering Type: Bosch/ZF variable-ratio rack-and-pinion with electric power assist; includes Active Steer Stops with available Magnetic Ride Control 4.0
Steering ratio: 15.7:1
Turning Circle
(ft. / m): 11.6 m (std.), 11.1 m (with FE4 Magnetic Ride Control)
Brake Type: Front and rear E-boost-assisted discs with Brembo four-piston/two-piece front calipers and four-piston/monobloc rear calipers
With Z51 – Front and rear E-boost-assisted discs with Brembo four-piston monobloc caliper at front and rear
Brake Rotor Size (in / mm): Front: 12.6 x 1.18 (321 x 30)
Front: 13.3 x 1.18 (345 x 30) – with Z51
Rear: 13.6 x 1.02 (339 x 26)
Rear: 13.8 x 1.06 (350 x 27) – with Z51
Wheel Size: Front: 19-inch x 8.5-inch (w/5 x 120mm bolt pattern)
Rear: 20-inch x 11-inch (w/5 x 120mm bolt pattern)
Tire Type and Size: Stingray: Michelin Pilot Sport ALS
Stingray with Z51: Michelin Pilot Sport 4S
Front: 245/35ZR19
Rear: 305/30ZR20
^Do not use summer-only tires in winter conditions, as it would adversely affect vehicle safety, performance and durability. Use only GM-approved tire and wheel combinations. Unapproved combinations my change the vehicle’s performance characteristics. For important tire and wheel information, go to: my.chevrolet.com/learn/tires/ or see your dealer.
EXTERIOR DIMENSIONS
Wheelbase (in. / mm): 107.2 / 2722
Overall Length (in. / mm): 182.3/ 4630
Overall Width (in. / mm): 76.1 / 1934
Overall Height (in. / mm): 48.6 / 1234
Track (in. mm): (front) 64.9 / 1648 (rear) 62.4 / 1586
INTERIOR DIMENSIONS
Headroom (in. / mm): 37.9 / 962
Legroom (in. / mm): 42.8 / 1086
Shoulder Room (in. / mm): 54.4 / 1381
Hip Room (in. / mm): 52.0 / 1321
WEIGHTS & CAPACITIES
Dry Weight (lb. / kg): 3366 / 1530
Cargo Volume (cu. ft. / L)*: 12.6 / 356.8
*Cargo and load capacity limited by weight and distribution.

2020 Corvette C8 Part One
2020 Corvette C8 Part Two
2020 Corvette C8 Drivetrain
2020 Corvette C8 Chassis
2020 Corvette C8 Interior
2020 Corvette C8 Why Mid Engine?